Overview


GS1GS1: Ruggedized Low Cost Volumetric Water Content Sensor

The GS1 is a ruggedized version of our basic, no-frills soil moisture sensor. It accurately measures volumetric water content in soil or soilless media. The longer lifetime of the GS1 helps your budget go further. It delivers research-grade accuracy at a price that makes large sensor networks economically practical. Characterize your site with sensors at multiple depths and locations, even on a tight budget. This sensor is built to last longer in the field under warmer, wetter conditions. The epoxy body withstands harsh environments and water intrusion. Two stainless steel needles cut through the soil for better soil-sensor contact and easier installation. Needles are also much more durable than our standard sensor blades. The GS1 is sensitive across the entire water content range. It can be installed in dry desert soils or in very wet peat. Sensitive to small changes in water content anywhere from 0 - 100% VWC. This frequency minimizes salinity and textural effects, making the GS1 accurate in most soil or soilless media. Can be used in a variety of conditions with the factory calibration. Install the GS1, plug it in to the Em50, set the measurement intervals, and start logging data. No programming required.

  • Features
  • Applications
  • Specifications
  • Downloads
  • Video

GS1 Ruggedized Low Cost Volumetric Water Content Sensor

The GS1 is a ruggedized version of our basic, no-frills soil moisture only sensor. It accurately measures volumetric water content in soil or soilless media.

Monitor More, Spend Less

The longer lifetime of the GS1 helps your budget go a long way. It delivers research-grade accuracy at a price that makes large sensor networks economically practical. Characterize your site with sensors at multiple depths and locations, even if you're on a tight budget.

Epoxy Body Withstands Tough Field Conditions

This sensor is built to last longer in the field under warmer, wetter conditions. The epoxy body withstands water intrusion and the sensor is built for long-term installation.

Stainless Steel Needles for Easy Installation

Two stainless steel needles cut through the soil for better soil-sensor contact and easier installation. Needles are also much more durable than our standard sensor blades.

Full Water Content Range

The GS1 is sensitive across the entire water content range. It can be installed in dry desert soils or in very wet peat. Sensitive to even small changes in water content anywhere from 0 - 100% VWC.

Plug and Log with Decagon Data Loggers

Install the GS1, plug it in to the Em50, set the clock and measurement intervals and start logging data. No programming required.

Database and Graph Measurements

Use this sensor with DataTrac 3 to quickly and easily store, access and compare soil water content data from a large installation.

Compatible with Many Other Loggers

The GS1 accepts a wide range of input voltages and has an easy-to-read voltage output. Voltage correlates to soil water content through a simple linear relationship, making this sensor easy to integrate into a wide variety of non-Decagon loggers.

GS1: Ruggedized Low Cost Volumetric Water Content Sensor

  • Water resources studies
  • Soil monitoring landfills, hazardous material
  • Waste management
  • Irrigation Control
Measurement
Measurement Time 10 ms (milliseconds)
Range 0-100% VWC
Resoultion 0.001 m3/m3 VWC in mineral soils
Accuracy ±0.03 m3/m3 in typical soils, up to 8 dS/m
With soil-specific calibration: ±0.01 to 0.02 m3/m3
Power Requirements 3.0 VDC to 15 VDC (absolute maximum) @ 15 mA
Output: 1,000 to 2,500 mV
Operating Enivornment Temperature -40 to 50°C
Physical Properties Dimensions 8.9 cm x 1.8 cm x 0.7 cm
Connector 3.5 mm "stereo" plug or stripped and tinned wires (3)
Cable 5 m Standard, Custom cable lengths available upon request
Warranty: One year, parts and labour