Product Description
The HS-100/300/600 offers an innovative, non-contact ultrasonic level sensor with no moving parts built for challenging water level measurement. This accurate and reliable sensor is built for water level measurement and general purpose, The unit is 9-30VDC and is equipped with a universal display. HS-100/300/600 offers user-programmable settings.
The level height is calculated from the time it takes for ultrasonic pulses to travel from the sensor to the surface of the medium and back. Chemical and physical properties of the medium do not influence the measurement result. Therefore, aggressive and abrasive, viscous and adhesive media can be measured without problems.
This continuous level measurement is based on the travel time of ultrasonic pulses to the surface of the medium and back.
When installing the sensor, the typical block distance has to be considered. Rough liquid surfaces and the changed angle during filling and emptying granulated solids influence the reflection of the ultrasonic pulses and may impact measurement.
| Range: 1m,3m,6m
Dead zone：≤0.1～0.4m Max measure error: 0.3%×full scale Power: 12-24VDC Power consumption: <1.5W Output signal: 4~20mA ,RS-232/485 Max load impedance: 300Ω |
Fix model: M60X2 or ￠61MM
Dimension:Φ92mm×198mm×M60 Admission cable: 1.5m Protection degree: IP65 Humidity: 0 to 95% Ambient temperature:-10℃~60℃ Ambient pressure: normal condition |
English
简体中文
